Elevator installation accessories bent galvanized angle for elevator

When installing elevator sensors, it is crucial to choose the right galvanized bracket. The following guide can help you accurately match the elevator model and size:

First, get the detailed model of the elevator and the space data at the bottom of the car.

● Residential elevator: The bottom space is compact and requires a small, efficient bracket.

● Commercial elevator: The bottom structure is complex and is suitable for a larger multi-functional bracket.

Provide a basic basis for bracket selection by measuring the length, width, height, and whether there are raised or recessed structural features at the bottom of the car.

According to the functional requirements of the elevator, select the sensor type and specify the installation location:

● Leveling sensor: Usually located at the bottom edge of the car to detect leveling accuracy.

● Weighing sensor: Installed in the center of the bottom of the car or in the load-bearing area to monitor load changes.

The design of the bracket must match the installation location and purpose of the sensor to avoid interference with other components during installation.

Select a bracket with a load-bearing capacity greater than 1.5-2 times the total weight of the sensor and auxiliary equipment.

● If multiple sensors or heavy equipment need to be installed, it is recommended to use a reinforced bracket to ensure stability and safety.
The surface treatment of the galvanized bracket can enhance its corrosion resistance and is suitable for long-term use.

Match the bracket size with the installation hole position
● The length, width and height of the bracket must adapt to the space at the bottom of the car and be precisely aligned with the reserved installation holes.

For cases where the hole positions do not match, you can choose a bracket with adjustable holes or customize the bracket as needed.

Refer to the elevator manufacturer's recommendations
● Consult the elevator technical manual or consult the manufacturer for recommended bracket models or installation requirements.

● Following the manufacturer's recommendations can ensure the compatibility of the bracket with the overall elevator system and improve operating performance.

Through the above methods, you can effectively select galvanized sensor brackets suitable for different elevator models and sensors to ensure safe installation and stable performance.