Durable Guide Rail Pressure Plate for Elevators

1. Preparation before installation

Check the quality of accessories
Check whether the guide rail pressure plate and related accessories are deformed, damaged or rusted to ensure that their quality meets the requirements.
Check the specifications of the guide rail pressure plate
Ensure that the specifications and dimensions of the guide rail pressure plate match the elevator guide rail and the installation location.
Prepare installation tools
Prepare necessary tools such as wrenches, screwdrivers and torque wrenches to ensure that the tools are intact and suitable for installation operations.

2. Guide rail pressure plate installation process

Install the guide rail bracket
Bracket position adjustment: Ensure that the horizontality and verticality of the guide rail bracket meet the elevator installation standards.
Bracket fixing: According to the requirements of the elevator installation manual, use expansion bolts and other methods to firmly fix the guide rail bracket to the building structure.

Install the elevator guide rail
Guide rail position adjustment: Install the elevator guide rail to the guide rail bracket, adjust the verticality and straightness of the guide rail, and ensure that it meets the elevator operation accuracy requirements.
Guide rail fixing: Use the guide rail pressure plate to firmly fix the guide rail on the guide rail bracket.

Install the guide rail pressure plate
Pressure plate position selection: Select a suitable installation location, usually install a set of pressure plates at a certain distance.
Fix the pressure plate: align the pressure plate slot with the edge of the guide rail and fix it with the pressure guide plate bolt.
Tighten the bolts: use a torque wrench to tighten the bolts according to the specified torque value to ensure that the guide rail pressure plate is firmly fixed, and avoid deformation of the guide rail due to over-tightening.

3. Post-installation inspection

Check the installation position of the pressure plate
Confirm whether the guide rail pressure plate is correctly installed and ensure that it is firmly fixed on the guide rail and the guide rail bracket.
Check the accuracy of the guide rail
Check the verticality and straightness of the guide rail. If deviation is found, adjust it in time to ensure that it meets the elevator operation requirements.
Check the bolt torque
Use a torque wrench to check whether the tightening torque of all pressure guide plate bolts meets the regulations. If there is any looseness, tighten it in time.
Carry out elevator trial operation
Start the elevator and observe whether there is abnormal vibration or noise in the guide rail during operation. If problems are found, check and deal with them in time.